Star Trading Agency

Here’s a full description of the (pneumatic high-speed sander) from DreBon:

Key Specifications

Free (no-load) speed: 16,000 rpm.

Sanding pad diameter: Approximately 5½ inch (≈140 mm).

Spindle thread size: 7/16″-20 UNF.

Overall length: ~205 mm.

Net weight: ~1.2 kg.

Air inlet: ¼″ (PT/NPT) – typical for air tools in this class.

Average air consumption: ~4 CFM / 112 L/min.

Pad size / format: A 5.5″ high-speed sander platform.

Description & Use-Cases

This is a pneumatic high-speed disc sander designed for tasks like sanding, smoothing or finishing surfaces—metal, wood, composites—where a compact but fast tool is needed. The high speed (16,000 rpm) allows for efficient material removal or fine finishing depending on the sanding disc used. Its relatively light weight (~1.2 kg) and modest size (205 mm length) make it suitable for handheld use on production lines or in workshop settings where maneuverability matters.

Because it uses compressed air, it’s more appropriate for industrial or professional use rather than casual home use (unless you already have a compressed-air setup). The 5½″ pad size offers a reasonable working surface without being overly large for tighter spots.

Features & Benefits

High RPM means faster surface finish or more aggressive material removal depending on the disc/abrasive used.

Moderate weight and compact length enhance operator comfort, reach and control.

Standard industrial air inlet and consumption make it compatible with typical shop compressors (if sized properly).

Large enough pad size to cover decent area per pass, but not so large that you lose maneuverability.

Durable build typical of DreBon’s industrial-grade air tools.

Considerations / What to Check

Ensure your air compressor and hose setup can supply the needed demand: ~112 L/min (4 CFM) at required pressure. Undersized hose or weak compressor may degrade performance.

Because of the high speed, proper abrasive discs / pads rated for 16,000 rpm must be used (using a lower-rated pad could be unsafe).

Ergonomics – although 1.2 kg is light for industrial tools, operator fatigue still matters in extended use. Consider anti-vibration setups if used continuously.

Maintenance – as with all pneumatic tools: keep air supply clean/dry, apply recommended lubrication, check air inlet fittings and hose condition.

Safety – high speeds mean greater hazard of abrasive disc failure, kick-back, flying debris. Use correct PPE, guard discs etc.

Match pad size/use to your task – a 5½″ disc covers well but if extremely small or contoured work is needed, a smaller tool may be more appropriate.

Summary

If you need a reliable, industrial-grade high-speed sander and you have access to a proper air-supply infrastructure, the DreBon DB-S-12 is a strong option. It hits a good balance of speed, size and usability. It’s especially suitable for metal fabrication, finishing shops, automotive bodywork, composite sanding, etc.

If you like, I can check current pricing in India, availability of accessories (pads/discs) for this model, and a PDF of the full spec sheet for you.

We are concerned with the trade, distribution and supply of Industrial PINNER that is precisely engineered at our vendor’s location. Made available in different specifications, these nailers are extensively applauded for their tough construction, comfortable grip, longer functional life and ease of maintenance. These high functionality nailers are offered at affordable prices.
Features:
Comfortable grip
Easy to maintain
Longer functional life